半潜式浮式风机支撑平台首摇运动特性分析     

陈嘉豪  胡志强 《海洋工程》2019,37(1):20-28

借助FAST软件对OC4半潜式浮式风机平台进行数值计算,分析了影响海上浮式风机平台首摇运动的一系列重要因素及其变化规律(如风向变化、浪向变化、陀螺力矩等)。研究了平台首摇运动所诱导的风机系统动力响应,发现浮式风机首摇运动不仅会加剧平台耦合运动响应,而且还会影响风机的气动性能和加剧锚泊张力波动。提出并探讨了几种减小海上浮式风机支撑平台首摇运动的方法。  相似文献   

Extracting energy while reducing hydroelastic responses of VLFS using a modular raft wec-type attachment     

《Applied Ocean Research》2019

This paper presents the use of a modular raft Wave Energy Converter (WEC)-type attachment at the fore edge of a rectangular Very Large Floating Structure (VLFS) for extracting wave energy while reducing hydroelastic responses of the VLFS under wave action. The proposed modular attachment comprises multiple independent auxiliary pontoons (i.e. modules) that are connected to the fore edge of the VLFS with hinges and linear Power Take-Off (PTO) systems. For the hydroelastic analysis, the auxiliary pontoons and the VLFS are modelled by using the Mindlin plate theory while the linear wave theory is used for modelling the fluid motion. The analysis is performed in the frequency domain using the hybrid Finite Element-Boundary Element (FE-BE) method. Parametric studies are carried out to investigate the effects of pontoon length, PTO damping coefficient, gap between auxiliary pontoons, and incident wave angle on the power capture factor as well as reductions in the hydroelastic responses of the VLFS with the modular attachment. It is found that in oblique waves, the modular attachment comprising multiple narrow pontoons outperforms the corresponding rigid attachment that consists of a single wide pontoon with respect to the power capture factor and the reduction in the deflection of the VLFS. In addition, it is possible to have a considerable gap between pontoons without significantly compromising the effectiveness of the modular attachment.  相似文献   

相邻两井对大地震的不同水力响应模型研究——页岩影响分析   总被引：1，自引：0，他引：1       下载免费PDF全文

张艳  符力耘  陈学忠  曹呈浩  赵连锋  马玉川 《地球物理学报》2019,62(1):143-158

大地震引起了左家庄和宝坻(相距～50km)两井中截然不同的同震水位响应.我们用水位的气压和潮汐响应来分析解释此现象.结果表明,宝坻井的观测含水层中存在页岩,且此井受裂隙影响很大,储水效应较差.页岩的复杂裂隙或者各向异性可能会导致此井观测含水层处于半封闭状态,从而导致垂直向排水的发生.通过多方计算分析后,我们将这两口井划分为两种模型—1.水平流动模型;2.水平流动+垂直流动的混合流动模型.由于裂隙影响,宝坻井的观测含水层介质与外界的水力沟通性在震前就较强(震前渗透率就比较大),所以宝坻井观测含水层与外界的孔隙压差异较小,导致同震渗透率上升较小甚至没有变化,这些因素是导致该井同震水位变化幅度总是非常微小的原因.  相似文献   

Thermo-hydro-mechanical modeling of unsaturated soils using isogeometric analysis: Model development and application to strain localization simulation     

Shahriar Shahrokhabadi  Toan Duc Cao  Farshid Vahedifard 《国际地质力学数值与分析法杂志》2020,44(2):261-292

This study presents a thermo-hydro-mechanical (THM) model of unsaturated soils using isogeometric analysis (IGA). The framework employs Bézier extraction to connect IGA to the conventional finite element analysis (FEA), featuring the current study as one of the first attempts to develop an IGA-FEA framework for solving THM problems in unsaturated soils. IGA offers higher levels of interelement continuity making it an attractive method for solving highly nonlinear problems. The governing equations of linear momentum, mass, and energy balance are coupled based on the averaging procedure within the hybrid mixture theory. The Drucker-Prager yield surface is used to limit the modified effective stress where the model follows small strain, quasi-static loading conditions. Temperature dependency of the surface tension is implemented in the soil-water retention curve. Nonuniform rational B-splines (NURBS) basis functions are used in the standard Galerkin method and weak formulations of the balance equations. Displacement, capillary pressure, gas pressure, and temperature are four independent quantities that are approximated by NURBS in spatial discretization. The framework is used to simulate strain localization in an undrained dense sand subjected to plane strain biaxial compression under different temperatures and displacement velocities. Results show that an increase in the displacement rate leads to reduction in the equivalent plastic strain while an increase in the temperature leads to an increase in the equivalent plastic strain. The findings suggest that the proposed IGA-based framework offers a viable alternative for solving THM problems in unsaturated soils.  相似文献   

多功能水合物沉积物三轴试验系统的研制与应用     

周家作  韦昌富  魏厚振  杨周洁  李力昕  李彦龙  丁根荣 《岩土力学》2020,41(1):342-352

研制了新型多功能水合物沉积物三轴试验系统，系统由供-排气模块、应力加载模块、温控模块、数据采集模块和辅助模块组成。利用泵驱动高压液体施加围压和轴压，加载方式有恒压、恒流、梯度增压、跟踪气压模式，可以实现不同条件下的水合物合成、三轴剪切。围压跟踪气压的功能使水合物生成过程中净围压不变，保证了试样初始条件一致性。根据围压液体积变化测量试样体积变形，通过设置回压泵压力变化方式控制水合物气压，可以模拟不同降压速率条件下的水合物沉积物分解变形。以泥质粉细砂和二氧化碳为材料制作了三轴试样，进行了水合物合成、三轴剪切和降压分解试验，检验了仪器的可靠性。  相似文献   

柱色谱分离-分子筛络合洗脱过程中正构烷烃单体碳同位素分馏研究     

董浩伟  赵佳玉  曾凡刚  谢曼曼  尚文郁  王淑贤  孙青 《岩矿测试》2021,(3):349-357

应用气相色谱-气体同位素质谱(GC-C-IRMS)分析正构烷烃单体碳同位素之前,需要对饱和烃样品中正构烷烃和异构烷烃进行预分离、富集,在预分离和富集过程中正构烷烃单体碳同位素是否发生分馏是高精度分析正构烷烃单体碳同位素比值(δ~(13)C)的关键。本文以正构烷烃混合溶液为对象,利用柱色谱、5■分子筛络合、环己烷-正戊烷混合溶剂两次洗脱,GC-C-IRMS分析正构烷烃单体碳同位素,研究前处理过程中正构烷烃单体碳同位素是否发生分馏。结果表明:使用柱色谱分离前后,多数正构烷烃单体碳同位素比值相差-0.2‰～0.2‰;当5■分子筛不完全络合时,未络合的正构烷烃单体碳同位素比值偏重约0.7‰,可能发生了微弱的碳同位素分馏,但并未影响洗脱后的正构烷烃单体碳同位素比值;使用环己烷-正戊烷混合溶剂洗脱前后,碳同位素比值相差-0.2‰～0.5‰,以同样方式洗脱第二次,获得的正构烷烃单体碳同位素比值与模拟样品相差-0.3‰～0.2‰。分析不同回收率(20%)正构烷烃的单体碳同位素比值,处理前后的差值基本在0.3‰以内,可见当正构烷烃回收率低至20%左右时,其单体碳同位素仍未发生明显分馏。柱色谱分离-5■分子筛络合-混合溶剂洗脱方法适用于回收率大于20%的正构烷烃单体碳同位素分析。  相似文献   

多相糜棱岩内第二相对应变局部化的影响——以秦岭群花岗质糜棱岩为例     

韩宁  赵中宝  王根厚  孙丽静  巴合达尔·巴勒塔别克 《地质学报》2021,95(5):1614-1629

糜棱岩韧性变形发生的应变局部化过程,尤其是多相糜棱岩第二相对基质相变形的影响一直是显微构造研究难点.研究表明糜棱岩借助颗粒边界滑移实现多相混合,形成多矿物相集合体.在多相糜棱岩内,第二相在基质相颗粒边界施加齐纳阻力,牵制基质相颗粒边界的迁移速率,破坏基质相颗粒的动态平衡过程,使基质相颗粒位于古应力计对应的颗粒粒度以下,导致基质相整体的表面积增大,促进扩散交换过程,提高了扩散蠕变,降低了基质相位错蠕变和结晶学优选方位(CPO)形成的效率,使变形机制从颗粒粒径不敏感蠕变机制(GSI)过渡为颗粒粒径敏感蠕变机制(GSS).另外,多相糜棱岩内的第二相具有诱导应变局部化的效应,使塑性应变局部化更为强烈,引起物质强度的变化,进而引起岩石变形过程和岩石圈流变行为的改变.选取秦岭群花岗质糜棱岩进行多相矿物糜棱岩定量化研究,结果显示花岗质糜棱岩伴随着云母含量的增多以及各相混合程度的增大,石英的颗粒粒度明显减小,CPO强度显著降低,基质相显微变形受第二相控制逐渐增强.  相似文献   

同轴双向回转钻进破岩效率研究          下载免费PDF全文

曹彦伟  李谦 《探矿工程》2021,48(S1):70-78

国内外相关研究均显示同轴双向回转可有效降低钻具振动和提高破岩效率,但双向回转相对传统单向回转的钻进效率的提升水平研究较少。据此,本文建立双向回转钻头以及单向回转钻头与岩石相互作用的有限元模型,以破岩比功作为评价指标量化比较分析了2种钻头的破岩效率。通过定义双向钻头内外壁尺寸差、内外钻头的间隙、内钻头壁厚与双向钻头内外壁尺寸差之比、内外钻头转速比和内外钻头底部高度差5种核心参数,并设计正交试验完成了仿真分析。结果显示,内外钻头高度差与内外钻头间隙对于破岩比功影响比较小,内外钻头尺寸差、内外钻头转速比和内钻头壁厚与双向钻头内外尺寸差之比对破岩比功影响显著。  相似文献   

Structural Setting and Kinematic Analysis of the Halaban Region,Eastern Arabian Shield,Saudi Arabia     

Osama M. KASSEM  Yousef A. ALAMRI  Faisal K. ZAIDI  Abdel Aziz M. AL BASSAM  Mansour H. AL-HASHIM 《《地质学报》英文版》2021,95(3):750-760

The vorticity analysis technique was applied to measure the different lithological units,such as schist,metagranite and metavolcano-sedimentary rocks,which are present in the Halaban region.This work aims to interpret the relationship between the different lithologies and the tectonic setting,in order to elucidate the nature of kinematic analysis in the Halaban region.The kinematic analyses were applied to feldspar porphyroclasts,quartz and hornblende for twentysix samples.The kinematic vorticity number (W_m) for deformed rocks in the study area ranged from～0.6 to 0.9.The direction of the long axes for finite strain data (X axes) revealed a WNW trend with shallow dipping.The direction of the short axes for finite strain data (Z axes) were represented by vertical with associated horizontal foliation.The results of the kinematic vorticity and strain analyses are characterized by simple shear with different degrees of deformation in the Halaban region.Furthermore,our finite strain data shows no significant volume change during deformation.The subhorizontal foliation was synchronized with thrusting and deformation.Furthermore,throughout the overlying nappes,the same attitudes of tectonic contacts are observable,the nappes in the orogens being formed from simple shear deformation.  相似文献   

CINRAD-SA双偏振雷达资料在降水估测中的应用初探   总被引：2，自引：0，他引：2       下载免费PDF全文

陈超  胡志群  胡胜  张扬  李珊珊 《气象》2019,45(1):113-125

对基于水平反射率ZH和差分传播相移率K_(DP)的降水估测综合法R(C)进行了改进,并对广州S波段双偏振雷达2016年2次飑线和2次台风降水过程的Φ_(DP)使用小波分析进行滤波处理,在此基础上使用变距最小二乘法拟合得到K_(DP)的值。分别使用R(C)和R(Z_H)法对2次飑线和2次台风降水过程进行降水估算,将估算结果和雨量计小时雨量进行了对比,并将两种方法的评估结果进行了对比。结果表明:(1)对于飑线类型降水,R(C)法对5 mm·h~(-1)以上的降水估测精度要好于R(Z_H)法,且降水率越大,R(C)法优势越明显,当降水率≥20 mm·h~(-1)时,两次过程R(C)法比R(Z_H)法的平均相对误差(RE)降低了17. 2%,平均绝对误差(AE)减少了1.89 mm,平均均方根误差(RMSE)减少了1.66 mm;(2)对于台风类型降水,R(C)法对5 mm·h~(-1)以上的降水估测精度也好于R(Z_H)法,当降水率≥20 mm·h~(-1)时,两次过程R(C)法比R(Z_H)法的平均RE降低了33. 19%,平均AE减少了3. 95 mm,平均RMSE减少了4.05 mm;(3)对于飑线和台风两种类型降水R(C)法都明显改善了降水率较大时的R(Z_H)法低估问题,但R(C)法在降水率10 mm·h~(-1)时也存在低估,可能是由雨滴谱资料观测误差导致拟合的系数偏小或雷达硬件造成的观测偏差等造成的。  相似文献